How To Change The Combination On A Sargent And Greenleaf Safe

LaGard/Kaba (LG)	800-950-4744	Website
BigRed	877-423-8073	Website
Sargent & Greenleaf (S&G)	800-826-7652	Website
LP Locks	949-362-8977	Website
SecuRam	805-988-8088	Website

Dialing a Mechanical Lock

To dial a Mechanical Lock Combination:
i. Plough the dial to the LEFT (counter clock-wise), stopping when _(1st number)_ is aligned with the opening index the Quaternary time.
two. Turn the dial to the Right (clockwise), stopping when _(second number)_ is aligned with the opening index the THIRD time.
three. Turn the punch to the LEFT (counter clock-wise), stopping when _(3rd number)_ is aligned with the opening index the SECOND time.
4.Turn the dial to the RIGHT (clockwise), until the dial stops, and the bolt retracts.

Using the Day Fundamental: Most safes come with a key locking punch. Close the door and turn the rubber handle. To lock the dial, insert the dial key and turn the cardinal a half a turn clockwise. Plough the punch to the correct (clockwise). The dial should terminate around 87.

Notation: The mean solar day cardinal feature is non suggested to utilise as the principal source of security.

1. Rotate the dial counterclockwise to the number 0.
2. Insert the key and turn it 180 degrees counterclockwise until it stops.
3. Remove the central and verify the punch is locked by turning the handle.

S&G Mechanical Lock Support
For Combination Lock Instructions

Here is a booklet for lock troubleshooting that may be able to assist you.

Using an Electronic Lock

S&Thou Electronic Lock Support
For Electronic Lock Instructions

Sargent & Greenleaf 6120 Electronic Lock:
1. Press 1-two-3-4-5-6-#, expect for tone.
ii. Turn handle

LP Combination Lock Support

Check out www.lplocks.com

For Combination Lock Instructions

LP Electronic Lock Back up
Check out www.lplocks.com

For Electronic Lock Instructions "Base Line Central Pad - Dual User Set-Upward Instructions"

LaGard/Kaba Electronic Lock Support

Using an EMP Redundant Lock

LaGard Combination lock (Redundant Lock):

1. Turn the punch to the Correct (clockwise), stopping when _(1st number)_ is aligned with the opening index the FIFTH time.
i. Turn the dial to the LEFT (counter clock-wise), stopping when _(2nd number)_ is aligned with the opening alphabetize the FOURTH fourth dimension.
2. Plough the dial to the Right (clockwise), stopping when _(tertiary number)_ is aligned with the opening alphabetize the Tertiary time.
3. Plow the dial to the LEFT (counter clock-wise), stopping when _(4th number)_ is aligned with the opening index the SECOND time.
4.Plow the dial to the RIGHT (clockwise), until the dial stops, and the bolt retracts.

Securam Combination Lock (EMP Redundant Lock / Condom Logic Xtreme)

To change the bombardment to your SecuRam SafeLogic Xtreme Keypad please refer to page ix in the instruction manual that came with the safe.

----------- ----------- ----------- ----------- ----------- ----------- ----------- ----------- ----------- ----------- ----------- ----------- ----------- ----------- -----------

Looking for a locksmith?

Source: https://www.sunweldingsafes.com/faqs

Posted by: hectorrusequithe.blogspot.com

Share this post